Features
● No moving parts, bestdurabilit
● Ultra fast switchingspeed
● Extremely stable latchingmode
● Low powerconsumption
● Easy to route -all fibers on sameside
● Exceptional reliability andstability
Applications
● Opticalswitching
● High speedprotection
● Systemmonitoring
● Test & measurement
● Fiber-optics sensingsystem
Product Description
1x2or 2x1 optical switch is an all solid-state device without any moving parts. The switchingof the optical light is realized by utilizing Faraday Effect.
Thisis achieved using a patent protected non-mechanical configuration with solid-state all-crystal design which eliminates the need for mechanical movement. The microsecond fiberopticswitch is designed to meet the most
Specifications
Item | Unit | Parameters | Notes | |
Unidirectioal | Bidirectional | |||
Wavelength Range | nm | 1525~1565 | Other band optional | |
Insertion Loss | dB | 0.6 (Typ.);1.0(Max.) | 0.7(Typ.);1.1(Max.) | |
PDL | dB | 0.1(Typ.);0.2(Max.) | 0.1(Typ.);0.3(Max) | |
Return Loss | dB | ≥40 (Typ 50) | ≥40 | Typical >50dB |
Cross-talk | dB | ≥40 (Typ 50) | ≥40 | Typical >50dB |
PMD | ps | 0.2 | ||
Repeatability | dB | +/- 0.01 | ||
Durability | cycles | Regular(>100Billions),Ultrafast(>1000Billios) | ||
Switching Speed | μs | Other speed optional | ||
Storage Temperature | 0 PPC | -40~85 | ||
Operating Temperature | 0 PPC | -5~70 | ||
Maximum Optical Power | mW | 500 | High power optional | |
Dimension( L×W×H ) | mm | 32.8x8× 7 | ||
Note:
1. All the specifications are based on the devices without connectors, and guaranteed over wavelength, polarization andtemperature.
2. Specifications are subject to change withoutnotice.
Dimensions Drawing (mm)
|
Electrical Specifications
Parameters | Specifications |
Unit | |
Regular | Ultra-fast | ||
Switching Speed | 50~200 | 2~20 | μs |
Switching Voltage (VCC) | 3(+/-5%) | 5~7.5 | V |
Switching Current | < 100 | < 350 | mA |
Driving Mode | Voltage or Pulse Driving | Pulse Driving | NA |
Pulse Width (typical) | 1000 | 200 | μs |
Claim Frequency | <800 | < 3000 | Hz |
Note:1.The recommended pulse width < 200us, if the pulse width of 20us is recommended to adjust the voltage to 7v.
2. When the switch is used for high-frequency switching, it is not recommended to use for a long time, if the need for a long time high-frequency switching, it is recommended to use a cooling device.
Unidirectional Pin control signal corresponding to switching status table
Pin1 | Pin2 | The Optical Output Port |
1(Voltage = VCC) | 0(Voltage = GND) |
|
0(Voltage = GND) | 1(Voltage = VCC) |
|
Bidirectional Pin control signal corresponding to switching status table
Pin1 | ||
1(Voltage = VCC) | 0(Voltage = GND) |
|
0(Voltage = GND) | 1(Voltage = VCC) |
|
Ordering Information (Example: ZMS-1112110)
ZMS- | □ | □ | □ | □ | □ | □ | □ |
Working Mode |
Switching Speed |
Operating Wavelength |
Fiber Tuber |
Fiber Type |
Fiber Length |
Connector Type | |
1. Unidirectional 2. Bidirectional | 1.50~200us 2.2~20us 3. Others | 1.1525~1565 nm 2. 1565-1615 nm 3. C & LBand 4. Others | 1.250μm fiber 2. 900μmfiber 3. Others | 1.SMF-28 2.50/125MM 3.62.5/125MM 4.80um细径 5.Others | 1.0.5 +/- 0.1 m 2. 1.0 +/- 0.1 m 3. Others | 0.No Connector 1. FC/UPC 2. FC/APC 3. SC/UPC 4. SC/APC 5. LC/PC 6. MU/PC 7. Others |
